Osburn Matrix Wood Insert OB02028
Description
The Matrix wood insert will seduce you with an average particle emission rate as 2.3 g/h and an optimal efficiency of 79%. The latest modifications made to this box are well in tune with the industry standards required for 2020. Although it retains a unique style that is both massive and sleek, we have reviewed the door mechanism to make it more functional. Adding a set of intermediate trim panels may be required to complete your masonry hearth. Always the same legendary Osburn quality.
Note that in order to install the optional projection kit AC01323, one of the optional faceplate backing plate kit AC01322 or AC01332 must be purchased separately to secure the projection kit to it.
Specifications
Appliance Performance
Fuel type : |
Dry cordwood (16" recommended) |
Recommended heating area-ft² : () |
500 - 2,100 |
Overall firebox volume-ft³ : |
2.4 |
EPA loading volume-ft³ : |
1.95 |
Maximum burn time : () |
8 h |
Maximum heat output-dry cordwood :
|
75,000 BTU/h (22.0 kW) |
Overall heat output rate < : |
14,200 BTU/h (4.16 kW) to 44,500 BTU/h (13.04 kW) |
Average overall efficiency (dry cordwood) :
|
72 % (HHV) |
77 % (LHV) |
Optimum overall efficiency :
|
79 % |
Optimum heat transfer efficiency :
|
76 % |
Average particulate emissions rate :
|
2.3 g/h |
Average CO :
|
69 g/h |
(1) Values are as measured per test method, except for the recommended heating area, firebox volume, maximum burn time and maximum heat output.
() Recommended heating area and maximum burn time may vary subject to location in home, chimney draft,heat loss factors, climate, fuel type and other variables. The recommended heated area for a given appliance is defined by the manufacturer as its capacity to maintain a minimum acceptable temperature in the designated area in case of a power failure.
(2) The maximum heat output (dry cordwood) is based on a loading density varying between 15 lb/ft³ and 20 lb/ft³ and reloading intervals ranging from 60 to 120 minutes. Other performances are based on a fuel load prescribed by the standard without any reloading between start and finish. The specified loading density varies between 7 lb/ft³ and 12 lb/ft³. The moisture content is between 19% and 25%.
(3) As measured per CSA B415.1-10 stack loss method.
(4) Higher Heating Value of the fuel.
(5) Lower Heating Value of the fuel.
(6) Performances based on a fuel load prescribed by the standard at 7 lb/ft³ and with a moisture content between 19% and 25%.
(7) Optimum overall efficiency at a specific burn rate (LHV).
(8) The optimum heat transfer efficiency is for the low burn rate (using HHV) and represents the appliance’s ability to convert the energy contained in the wood logs into energy transferred to the room in the form of heat and does not take into account the chemical losses during combustion.
(9) This appliance is officially tested and certified by an independent agency.
(10) Carbon monoxyde.
General Features
Combustion technology |
Non-catalytic |
High-efficiency certified appliance |
Yes, EPA 2020 approved |
Maximum log length |
20" |
Log positioning |
Loading over width |
Chimney diameter |
6" |
Flue outlet diameter |
6" |
Type of chimney |
Liner - ULC-S635, CAN/ULC-S640, UL1777 |
Minimum chimney height (feet) |
12' |
Baffle type |
C-Cast or equivalent |
Approved for a mobile home installation |
No |
Shipping Weight |
491 lb (223 kg) |
Door type |
Single, glass with cast iron frame |
Glass type |
Ceramic glass |
Glass surface – dimensions (Width X Height) |
19 5/8" X 11 7/8" |
Glass air-wash system |
Yes |
Premium quality blower included (CFM) |
90 |
Overall dimension (Height) |
25 1/8" |
Overall dimension (Width) |
36 1/8" |
Overall dimension (Depth) |
23 1/8" |
Door opening – dimension (Height) |
8 3/4" |
Door opening - dimension (Width) |
17 1/2" |
Firebox – dimension (Height) |
11 7/8" |
Firebox – dimension (Width) |
21" |
Firebox – dimension (Depth) |
16 3/4" |
Firebox lined with refractory bricks for better heat distribution |
Yes |
Stainless-steel secondary-air system improving gas combustion |
Yes |
Steel thickness – body |
3/16" |
Steel thickness – top |
5/16" |
Fireplace opening – minimum (Height) |
23 3/8" |
Fireplace opening – minimum (Width) |
28 7/8" |
Fireplace opening – minimum (Depth) |
19 5/8" |
USA standard (emissions) |
EPA / ASTM WK47329 |
Canadian Standard (emissions) |
CSA B415.1-10 |
USA standard (safety) |
UL 1482, UL 737 |
Canadian standard (safety) |
ULC S628 |
Tested and listed as per applicable standards |
By an accredited laboratory (CAN/USA) |
Warranty |
Limited lifetime |
Maximum clearances to combustibles* (Data expressed in inches. 1 inch = 25.4mm)
|
Canada |
United-States |
Clearance – combustible side mantle to unit |
9" |
9" |
Clearance – combustible top mantle to unit |
27" |
27" |
Clearance – combustible side wall to unit |
16" |
16" |
Clearance – minimum floor protection in front of the appliance |
18" |
16" |
Clearance - from the top of the unit to the shelf |
27" |
|
Clearance – from the top of the insert to the shelf |
|
27" |
* The information given on the certification label affixed to the appliance always overrides the information published in any other media (owner's manual, catalogues, flyers, magazines and/or
|
Resources
Why Shop With Modern Productions® ?
1) Amazing Customer Service: We put our customers first. Compared to big box retailers, you can expect to speak to a REAL person at all times and quickly. Give us a call and one of our customer service agents will be there to help you with anything you may need. We're not like most companies who look at you as just an order number, you matter to us and your order is assigned to an agent who truly wants to make sure you are satisfied.
2) Top Quality Products: We have a partnership with the brand you're looking to purchase. We work directly with the manufacturer/brand, so not only will you be counting on our support but you will also count on the manufacturer's support. We are committed to providing a fast and easy shopping experience for you.
3) Fast Shipping: If our products are in stock, we typically ship your order within the same day you placed it or 3 days after you place your order. Once your order ships our system automatically sends you a tracking number to the email you provide during checkout. Once your order is on the way it usually takes the carrier 5-7 business days to deliver it to you.
4) Financing: We understand the benefits that come with financing your order. It can increase your credit score and provide you with a flexible payment option that best works for you. If financing is something that you're interested in, you may use one of our following partners at checkout: Paypal or Shop Pay.
5) No Sales Tax: Every order placed is eligible for No Sales Tax if you are located outside of California. Once you finish inputting your shipping and billing information at checkout, your order will automatically be tax-exempt as long as you are outside of California.
If you have any concerns or questions about the product you want to purchase, our sales and customer team is there to help you.
You can either:
Email us at: info@modernsproductions.com
Call us at: (415) 503-9177
Text with us through our live chat (usually faster response times)